We welcome you to a New World in motor performance

This new range of High Speed Out runner Motor has been developed with one objective: To have the best power to weight ratio in the world. This has been accomplished through one year of intensive effort in research and development. The new magnetic system is called " NFS " (Noro Fabrice System), the innovators name. The new system has many advantages. First it is based on the standard out runner type motor, renowned for giving high torque. As Power = Torque X Speed, there is only one way  to increase power, it is to increase RPM.  Before Cyclon and NFS, this was not possible, because an increase in rpm means a computation increase above the speed of the controller’s capabilities; in brief the controllers processor is not able to compute fast enough for high revolutions with a 14 or 10 pole out runner motor. Now it is possible with the new NFS system, with the new motors capable of up to 40,000 RPM, yet still giving the same torque as a 10,000 RPM out runner motor.  For the same size and weight as a standard out runner motor, the power is up to 2 times higher than the standard out runner motor format.

Christophe Paysant Le Roux  , World Champion F3A , approved  high power micro out runners.

One of the smaller motor in the worls able to fly with higth power  you indoor models. Able to hovering on 150 gr model. It is a new reference, turning 8/4,3 Prop under 2 lipos up to 50 w.

Mini Cyclon     CPLR Edition

 New version of one of the highest power motor for park fly. Work on 2 - 3 Lipo  and turn up to 9/4,7 Prop (3 lipo)  for small models,  Park Flyer or big indoor. 3D models fly superbly up to 500 grams, and 1000 grams for standard flying. Power from  50 to 150 Watts, weight 45grams .

Fly Motors

HD Classic out runner   for Airplanes    

Show motors data Table

This Range of out runner are replacing the last "Twister series with advantage of more maximum torque due to new high grade magnets.

Cyclon.25, a very small and lightweight motor (only 125 grams) ,   is yet enough  powerful to replace any .25 size 2 strokes glow engine. Ok for models from 1 to 2.5 kg and  for 6 to 10 cells NI-xx.

Our best seller, the Cyclon.40 is a motor which can be easily integrated: Just replace your .40 or .45 with your Cyclon.40, secure a 11x6 or 12x6 prop, add your 12 cells pack and you can take off! Weight is 175 grams. For models from 1.5 to 4 kg and 7 to 14 cells.

Cyclon 60      4S-7S Lipo 

High power and extremely versatile is the definition for the Cyclon.60. Of course, it can replace a .60 glow engine, but it can do more. This motor is able to turn very huge size prop to perfectly finish your realistic scale model. Weight is 235 grams, model from 2 to 6kg, ready to accept 10 to 20 cells. Good choice for scale glider up to 5Kg.

Cyclon 90      6S-10S Lipo 

Monster motor, the Cyclon.90 is able to more than 1000 Watts continuous power! This motor can take place in  model with 30 Nimh cells or 10 LiPo cells. Vertical climbing ability for up to 4 kg models, and can fly models up to 10 kg. With only 320 grams.

HD outrunner small size for Airplanes/Gliders    

Show motors data Table

Cyclon 20     2S  Lipo

Classic out runner to replace any 20 size 2/4 stroke Engine in your airplane. Model flying weight up to 2 Kg. 225 Watts continuous 300 Watts peak, weight 100 grams. Very good for "Speed"600 Glider Class , with very easy replacing.

Cyclon 30      3S-4S Lipo 

Classic out runner to replace any 30 size 2/4 stroke Engine in your airplane. Model flying weight up to 3 Kg. 330 watts continuous 420 watts peak, weight 150 grams . Good solution for your glider up to 3 kg.

Cyclon  F3A     8S-10S  Lipo

This out runner  motor  have been specially designed to replace engines in F3A models. This out runner motor is probably the best at this time for F3A aircraft. This motor gives you the flexibility to tailor props to current and RPM  to match your aircraft.  Good starting point for a F3A size aircraft will be props ranging from 17 /12  to 21/13. Designed for 30 NiMh cells or 10 Lipo. Weight 550 gr

 Current can be 75 amps continuous , and go up to 100 Amps for a short duration.  Total out Power is 2500 W continuous , 3500 peak .   More Info Soon !

Elite Fly Motors

Geared high power outrunner   for Gliders

All Cyclon Elite motors are NFS based     

Show motors data Table

Cyclon Elite Mini  PUNCH

 New strong version  of the most impressive motors in the Cyclon Range (NFS). This motor has the ability to deliver more than  300 watts continuous and 450 peak watts yet it weighs only 80 gr. It is the only motor in the world at this time  to offer so much  power for such low weight. No more comment is needed... Perfect for your glider of 700 grr up to 2,5 kg. This new version have bigger magnets than his predecessor, and a new gear set saving noise and efficiency .

Cyclon Elite  10

 Very high Performance (NFS) motor designed for Sailplane/Glider, climbs superbly with 8 to 10 cells.

 Of course it can be used on planes and for 3D flight. Power continuous  600 Watts, up to 1000 Watts peak, only 36 mm diameter, and only 200 gr. weight, capable of turning props up to 18 ". This motor gives you  a serious advantage for your models in many applications.  Gliders up to 4 kg.

Cyclon Elite  18

 High power (NFS) motor for Gliders and aerobatic Planes. Motor works with 12 to 18 cells, driving

 propellers up to 20 inches. Power 1000 W continuous, up to 1500 watts peak. Weight only 250 grams!

 A very good partner for  your 6-8 kg big scale glider giving the possibility for an outstandingly fast

 climbs with only 18 cells!

Cyclon Elite  24

 High power (NFS) motor for Glider and aerobatic/war bird plane, ready to work with 20 up to 24 cells

 it can be used with 25 inch props. Continuous power  1400 W, close to 2000 W peak. Motor weight of

 350 Grams , use for big aerobatic Sailplane such as the " FOX " up to 8 kg, Ideal for scale gliders of

 10 -14 kg, with 24 cells. Can be used to power scale planes such as war birds, giving the possibility to use very big  scale props, of around 20 to 25 inches, and give vertical ability on a 6-7 Kg model of 1,9 M

Heli motors

All Cyclon Héli motors are NFS based     

Show motors data Table

Cyclon Mini  Heli  PUNCH

 NFS motor , new version of the Mini heli , with higher KV 3450, and more courant ability. Now the new motor is able of 20 continues amps, and have max efficiency in the 15 A range . able go up to 35 A short duration to gave under 3 lipo power  200 to 350 W  to power you’re micro heli in Extreme 3D Flight. Warning to be sure about you mechanic !! This motor  specially made for maximum performance on à T rex 450 , CArboon 400 , Caliber 400. can be mounted or course  aboard New   ZOOM 550 , ZOOM 400 with option , new  CARBOON CP, Viper 70 IKARUS  and  MS HONET 2. The ultimate motor for only 52 gr !

Cyclon Heli 4000

This motor is based on NFS,  and gives very high power for low weight. Only 120 grms, it is capable of 320 W continuous  with 8 cells (Eco 8, Corona, Eolo, Spirit). It becomes more powerful on a Voyager as the cells can go up to 10, then the output  power can be 400 W continuous, and  can go to 600 W for short duration (3D maneuvers). 4000 Rpm/V

Cyclon Heli 2000

This motor is based on NFS,  and gives very high power for a low weight. Only 150 grams, it is capable of 480 W continuous,  700 W peak  with 12 cells (Logo 10, Eco 16). Still on same Heli, with 14 cells, it becomes very powerful with  560Watts  continuous 840 Watts peak. It can become an even more powerful motor with 16 cells, then the power can go up to 900 watts  during 3D moves. Just keep those eyes open!  2000 Rpm/V

Cyclon Heli 1600

This motor is based on NFS for using from 16 to 24 cells, Weight about 270 grams, able to support  960 Watts continuous,  1400 Watts short duration. Can be fitted in Logo 16 - Logo 20 with  20 Cells. Can Go to 24 cells with appropriate gearing  ratio, 1600 Rpm /V

Fan Motors

All Cyclon Fan motors are NFS based     

Show motors data Table

Mini Cyclon Turbo

This is a  200 W micro motor specifically designed for Micro Fan. NFSystem. Works well in Wemotec Mini Fan, with 12 cells (1100 mAh) or Li-po 4 S (2000). Up to 15 Amps continuous, or 20 Amps short duration. Can be used in small pylon racer or fast  small sports design for good fun with small 4,7/4,7 prop.

Cyclon Turbo  4000

Motor for  500 size Fan like Wemotec 609, or Graupner 500. NFSystem. Can work with 8 to 10 cells in this Fan type, or 7 cells  in 90 diameter size fan. Power with 10 cells can go up to 500 Watts.  4000 Rpm/V

Cyclon Turbo  2500 - 2000

Motor for  90-mm diameter  Fan like Wemotec 620, Midi Fan, Shubeler 90 or GePe. NFSystem.

Can work with 10 to 14  cells (for the 2500), or 12 to 16 cells (2000)  in this Fan type. Power with

16 cells can go up to 900 Watts. Rpm/V 2000 or 2500

Cyclon Turbo  1600

Motor for  big  Fan like Wemotec  xx or gas powered fans converted. Power with 24 cells can go up

 to 1200 Watts. Rpm/V 1600

Car motors

All Cyclon Car motors are NFS based     

Show motors data Table

Mini Cyclon Car PUNCH

Motor designed for MINI INFERNO Kyosho , Micro RS4, Mini Truck 1/18 scale as NEW ASSO 1/18em. Can work with 6 to 7 cells GP 2000 or  2 Lipo cells, power up to 350  Watts, max 450 W / 5300 rpm/V.

Cyclon Car 4000

Motor for Off road  4x2  -  1/10  with 6 Cells, or DTM 1 /12 with 6 cells

4000 Rpm / V, Power:  430 W with 6 cells.

Cyclon Car 5000

Motor for Off road  4x4  -  1/10  with 6 Cells, or DTM 1 /10 with 6 cells

5000 Rpm / V, Power:  550 W with 6 cells.

Cyclon Car 7500

Motor for Dragster 1/10  with 6 Cells, or DTM 1 /12 with 4 cells

7500 Rpm / V, Power:  700 W with 6 cells. 480 W with 4 cells.

Cyclon Car 2500

Motor for Big truck like E max or HPI Savage, OK for 12 cells, peak power 1200W, 2500 Rpm /V

Cyclon Car 2000

Motor for Big truck like E max or HPI Savage, OK for 16 cells, peak power 1300W, 2000 Rpm /V

Cyclon Car 3700

Motor for Big truck like E max or HPI Savage, OK for 8 cells, peak power 1000W, 3700 Rpm /V. This is a very interesting motor,  that can be mounted in any 1/8  car with 12 cells. In this condition, the max rpm can go up to 40,000 and has torque similar to  a 21 class engine. Now you can change your Serpen, Mugen car, or your MP7  to an electric version!

Boat Motors

All Cyclon Boat  motors are NFS based.     

Show motors data Table

Boat Motors come with the water-cooled system.

Cyclon Marine 4000   Motor for  Mono 1 Class   with 7 cells. Max power  500 Watts,  4000 Rpm/V

Cyclon Marine 5000   Motor for  Mono 1 and Hydro 1 CLass    with 7 cells, Max power 600 W. Can be used also on Mono and Hydro with 6 cells, 5000 Rpm/V

Cyclon Marine 7500     Extremely hot motor  for Hydro with 7 cells, Max power 700 W. Can be used also in Hydro with 6 cells, 7500 Rpm/V . ONLY for competitors .

Cyclon Marine 2000  Motor for Mono and Hydro with 12 cells (can be used with 10 to 14). Max power about 1000 W with 14 cells, 2000 Rpm/V

Cyclon Marine 2500   Motor for  Hydro with 12 cells (can be used with 10 to 12). Max power about 1000 W with 12 cells, 2500 Rpm/V

Cyclon Marine 3700   Extremely hot motor  for  Hydro with 12 cells (can be used with 8 to 12). Max power about 1200 W with 12 cells, 3700 Rpm/V, ONLY for competitors .

Cyclon Marine 1600

Motor for Mono and Hydro with 20 cells. Can be used with 12 to 20 cells, 1600 Rpm/V